Dragon Staff Cuffs
The Dragon Staff Cuffs can connect to any staff 25mm diameter or less. If the staff is less than 25mm you need to use tape to increase the diameter with aluminum tape is recommended. We recommend using the cuffs with a Gora Contact Staff (solid or portable) between 150-180 cm long depending on your individual height and style.
The spines are made of 7075 aluminum alloy, which allows 8mm diameter without sacrificing stability or impact resistance. The connection of the sticks to the cuff is a quick link coupling, which makes assembly and disassembly easy.
For practice sessions you can apply the sticks per hand, but for fire spinning we recommend tightening them with a screwdriver to avoid losing them at high rotation speeds. After tightening the screws always unlock them with a screwdriver before taking them off. If the surface of the sticks is damaged it may wedge into the cuff, take care to attach the cuff to only a round staff. The price is for a pair, including 8 spokes.
Use lamp oil or white gas, lamp oil burns at a much lower temperature.
Always shake out excess fuel before you light up the torch.
Make sure that no fuel gets on the body of the staff it is not fire proof.
Be carful to put away fueling bottles before you light your torches.
by Ricardo Fallas on 07/27/21