The new carbon fire staff
A new desgin using carbon fiber tubing, this makes for a more flexible staft, stiff yet it has some sping to it, more then the aluminum shaft. This makes the satff very nice if you do a lot of throwing. It has a slight pop to it, in that it can spring out of hand with nice effect.
The staff has silicone protectors near the fire-heads. In general, if you make a mistake with catching the staff, the heated metal can cause serious burns, but this will not happen because athe silicone covering is there to protect you. The black colour silicone has the highest heat resistance!
This carbon staff has a weight of 2 pounds, 59 1/4 inches long, with 4 inch wicks.
A soft grip is very suitable but it wears out after about a year. Tennis grip is more sticky and absorbs the sweat, but it is very thin. The best solution is to combine the two materials.
Because of oversize regulations we cannot deliver this one piece staff international. You would need to order a breakdown contact staff
- Do not use white gas, benzene, Colman fuel, or alcohol based fuels.
- Do not hold the staff vertically. Spin it, or keep it horizontal!
- Handle the grip carefully to avoid damages.
- Use lamp oil or barbecue lighter fluid.
59.25 inch (150cm), weight 2.0 pounds)
4 inch wick ends
staff is 1 1/8 in diameter