The Aluminum fire staffs Comes in mutiple lengths 6 feet- 3 feet. If the staffs 4 feet or less , 2 inch wide wick is used. All the longer staffs have 4 inch wicks. The aluminum staff is made with 7/8 inch diameter T-6 tempered aluminum and is constructed with a wood plug in the end. The wicks are attached with self tapping screws. To select the proper size, the staff should come to about your chin or nose for single staff work and your chest hight for double staff. It you are over 6 feet tall you can special order a longer staff, just contact us with what you want at no extra charge. Each staff has holographic silver decorations at each end.

Five foot staff specifications
length 5 feet (152cm)
weight 1.53 pounds (695 grams)
tubing aluminum 6061 T-6, 0.875 (22mm) OD X 0.58 (1.5mm) wall thickness
kevlar blended wick 4” (10cm) X 2.25”(5.5cm), 36” (92.5cm) length of wick per end
grip black vinyl tape
tubing ends plugs with maple dowel
decorations holographic film all parts made in USA

Four foot staff specifications
length 4 feet (122cm)
weight 1.01 pounds (485 grams)
tubing aluminum 6061 T-6, 0.875 (22mm) OD X 0.58 (1.5mm) wall thickness
kevlar blended wick 2” (5cm) X 2.25”(5.5cm), 36” (92.5cm) length of wick per end
grip black vinyl tape
tubing ends plugs with maple dowel
decorations holographic film all parts made in USA

There are no videos for this product.

Use lamp oil or white gas, lamp oil burns at a much lower temperature.
Always shake out excess fuel before you light up the torch.
Make sure that no fuel gets on the body of the staff it is not fire proof.
Be carful to put away fueling bottles before you light your torches.

There is no more information for this product.